| 9 |
With
spray gun inverted, lower onto 3M™ PPS cup and lock gun adapter to
lid. |
 |
| 10 |
Correct:
Make sure that the lid fingers are fully engaged above adapter edge. |
 |
| 11 |
With
air line connected, invert gun and pull trigger (full open, not
partial) to bleed air from the liner. |
 |
| 12 |
Air
only needs to be bled if spraying is to be done in the inverted
position. |
 |
| 13 |
With
the air removed from the liner, the gun may be sprayed upside down
or in any direction to reach into difficult areas. |
 |
| 14 |
Disconnect
air line, invert gun and pull trigger (full open, not partial) to
return mix to gun cup before disconnecting gun. |
 |
| 15 |
To
retain unused paint, seal the lid/liner with a sealing cap, and
store. Consult paint or solvent Material Safety Data Sheet (MSDS)
for safe use and disposal. |
 |
| 16 |
When
the 3M™ PPS cup is empty the collapsed liner and lid may be
disposed of. Consult local regulations or authorities for proper
disposal. |
 |
