A positive displacement resin pump is used to dispense an exact amount of polyester with each pump cycle. A stainless steel catalyst pump is linked to the polyester pump. Catalyst percentages can be selected from .5% to 4.5%. The catalyst percentage selected will be locked-in. The selected percentage will be maintained every time material is dispensed from the RCD system.

Accurate and consistent metering of polyester resin and catalyst is very important in all fiberglass operations.

The RCD system brings unmatched performance to any operation using batch-mix processing.

A single handle on the dispense valve operates the unit. When turned to the "on" position, both polyester and catalyst are dispensed through individual tubes into the container.

The RCD requires NO FLUSHING when the dispense valve is closed.