|
|
|
INSTRUCTIONS
FOR USING AUROMAT
|
| For
manual or spray up resin applications: The AUROMAT should be cut to
fit the mold using a trim knife or hand scissors. |
| 1.
Apply a layer of fiberglass saturating it with resin. Roll it out
thoroughly. |
| 2.
Place the AUROMAT on top of the wet resin. Then impregnate the
topside of the AUROMAT layer with resin (it can be sprayed on). |
| 3.
After 20 to 30 seconds the binder has dissolved. Then you can form
AUROMAT to fit virtually any shape. Be sure to saturate AUROMAT. The
excess resin will flow to the surface and will be absorbed by the next
layer of fiberglass. |
| 4.
In order to ensure a smooth surface, adjacent pieces of AUROMAT should
be butt jointed rather than overlapped. Since the wet AUROMAT will
stretch, pieces can be easily joited with a roller |
|
Now the final layer of fiberglass can be applied!
|
|
INSTRUCTIONS
FOR STORING AUROMAT
|
| Store
vertically. Do not lay down. |
| Do
not expose to direct sunlight. |
| Each
roll has a label with the following information: lot #, date, width,
length, thickness. |
|
PROPERTIES
OF A LAMINATE * MADE WITH AUROMAT
|
| |
METHOD |
RESULT |
UNIT |
| TENSILE
STRENGTH |
| LOAD
(MAX) |
ASTM-D
638M |
1,810.00 |
N |
| ELONGATION
BREAK |
ASTM-D
638M |
2.12 |
mm |
| TO
BREAK |
ASTM-D
638M |
27.78 |
Mpa |
| TENSILE
MODULUS |
ASTM-D
638M |
3,317.00 |
Mpa |
| |
| FLEXURAL
STRENGTH |
| PEAK
FLEXION |
DIN-53452 |
6.25 |
mm |
| LOAD
(MAX) |
DIN-53452 |
26.40 |
kgf |
| FLEXURAL
STRENGTH |
DIN-53452 |
73.58 |
N/mm2 |
| APPARENT
FLEXURAL MODULUS |
ASTM-D
790 |
3,382.09 |
Mpa |
| BENDING
MOMENT AT FAILURE |
ASTM-D
790 |
6,475.09 |
Nmm |
| |
| *
LAMINATE: < 450 g / mt² CSM-AUROMAT HM3- 450 g / mt² CSM |
|
AUROMAT® HEX
|
| UNIT |
|
1mm
|
2mm
|
3mm
|
4mm
|
5mm
|
| DRY
WEIGHT |
gr/mt² |
40
|
80
|
135
|
165
|
270
|
| THICKNESS
DRY |
Inch |
0.05-0.07
|
0.07 - 0.09
|
0.11 - 0.14
|
0.14 - 0.18
|
0.19 - 0.21
|
| THICKNESS
WET |
Inch |
0.07-0.09
|
0.09 - 0.11
|
0.13 - 0.15
|
0.15 - 0.18
|
0.20 - 0.22
|
| ROLL
LENGTH |
Ft |
393.70
|
262.46
|
64.04
|
131.23
|
98.43
|
| WIDTH
(REGULAR) |
Inch |
39.37
|
39.37
|
39.37
|
39.37
|
39.37
|
| DENSITY |
gr/cm³ |
0.055
|
0.055
|
0.055
|
0.055
|
0.055
|
| RESIN
CONSUMPTION |
Kg/mt² |
0.80
|
1.2
|
1.8
|
2.4
|
3.0
|
|
CONTAINER
CAPACITY / AMOUNT OF AUROMAT ROLLS
|
| CONTAINER |
QUANTITY |
| 40'
STD |
285
rolls |
| 20'
STD |
135
rolls |
| CLASIFICATION
OF AUROMAT BY HS CODE |
| Reference |
Tariff
Heading |
| AUROMAT
HMX-1 |
56.03.13.00.00 |
| AUROMAT
HMX-2 |
56.03.13.00.00 |
| AUROMAT
HMX-3 |
56.03.13.00.00 |
| AUROMAT
HMX-4 |
56.03.14.00.00 |
| AUROMAT
HMX-5 |
56.03.14.00.00 |
Special Offers | About Us | Order
Catalog | Contact Us
| Home
© 2002 Mini-Craft of Florida, Inc. All Rights Reserved.
|
|
