Air Powered Chopper Gun

A hand held, variable speed air powered chopper gun for coating molds or parts with glass reinforcement.  Continuous strand glass roving is fed into the rear of the gun.  The roving is then chopped into short pieces and deposits them onto the mold.  Resin is then applied by brush, roller or sprayed on using a cup gun.  Variable length fibers 5/16" to 4". This gun will deposit the equivalent of one layer of 1 oz mat onto a vertical surface without fall-off before wet-out.  Ideally suited to quick mold or part build-up once the first layer or two are in place.  Use a saturation roller to remove trapped air.  Safe and easy to operate.  Has speed control for large or small output.

Electric Powered Chopper Gun

A hand held, variable speed electric powered chopper gun for coating molds or parts with glass reinforcement.  Continuous strand glass roving is fed into the rear of the gun.  The roving is then chopped into short pieces and deposits them onto the mold.  Resin is then applied by brush, roller or sprayed on using a cup gun.  Variable length fibers 5/16" to 4". This gun will deposit the equivalent of one layer of 1 oz mat onto a vertical surface without fall-off before wet-out.  Ideally suited to quick mold or part build-up once the first layer or two are in place.  Use a saturation roller to remove trapped air.  Practical for large work in large shops because of high glass output.  Practical for small work in small shops because of compact size and controlled output.  Has speed control for large or small output.