Store

$0.00

A hand held, variable speed air powered chopper gun for coating molds or parts with glass reinforcement. Continuous strand glass roving is fed into the rear of the gun. The roving is then chopped into short pieces and deposits them onto the mold. Resin is then applied by brush, roller or sprayed on using a cup gun. Variable length fibers 5/16" to 4". This gun will deposit the equivalent of one layer of 1 oz mat onto a vertical surface without fall-off before wet-out. Ideally suited to quick mold or part build-up once the first layer or two are in place. Use a saturation roller to remove trapped air. Safe and easy to operate. Has speed control for large or small output.

Part Number:

RJL100349

hidden field

Mitey Buff

$0.00

It’s a buffing pad. It’s a polishing tool. It’s the Mitey Buff! Able to polish small areas with ease. Able to jump from one mold to another. Comes in two handy sizes, 3", 2",

• Helps to produce a high gloss surface.
• Cuts labor time saving you time and money.
• Improves the mold quality and gelcoat finish.
• 1" to 1 1/2" pile.
• Washable for hundreds of applications.
• Easy to change.
• Used by professional mold care personnel.

Quick Change Pads:

Part Number Description

MCMMITEY-3 3" Mitey Buff #3
MCMMITEY-2 2" Mitey Buff #3

Quick Change Holders:

Part Number Description

2" twist holder 1/4" shaft

3" twist holder 1/4" shaft

hidden field

Double-Sided Buffing Pads

$0.00

Features a unique double face construction, allowing both sides of the pad to be used.

Part Number Description

ABC10-122 Double sided Buffing pads 8" 1 1/2 PILE

hidden field

Bonnet Cleaning Tool

$0.00

Quickly fluffs and cleans buffing pads and bonnets while pads are rotating.

Part Number Description

RJL100097 Bonnet Cleaning Tool

hidden field

Buffing Compound Bars

$0.00

The white dry buffing compound (BOD38-22W) has a very slight bite and is excellent for final finish. It brings a high luster to cosmetic gel coated surfaces. The red dry buffing compound (BOD38-23R) is designed to get to the deeper scratches in the molds. It has more bite and is designed to take out up to 600 grit scratches in the mold. When the red compound is used, it can be followed with the white compound to bring out an even deeper brilliance. The silver dry buffing compound (BOD38-24S) is comparable to the red except it is colorless. It can be used on molds and all cosmetic gelcoat surfaces. These buffing compounds are used successfully by the marine, tub and shower, and synthetic marble and other miscellaneous industries with NO MESS. They are particularly good in large boats where wood, fabrics and other non FRP materials are already installed.

Part Number Description

BOD38-22W White Buffing Bar
BOD38-23R Red Buffing Bar
BOD38-24S Silver Buffing Bar

hidden field

1/4" Angle Die Grinder

$0.00

Specifications: 2,500 RPM, 7-1/2" length, 1 lb.

Angle head design allows access to confined areas.
Rear exhaust prevents chip blow back.
High speed for fast material removal.

Part Number:

hidden field

Mini Buff

$0.00

Designed to be used in small, tight areas which are difficult to reach with a normal size buffing tool. The Mini-Buff can be used with a 1/4 - inch drill, 1/4 - inch air drill or a 1/4 - inch die grinder. A 1/4 - inch male arbor is included with the purchase. This unique buffing pad can be washed and reused again and again. The Mini-Buff will definitely save company time and cut your labor costs.

Part Number Description

MCMMBA-1 Mini-Buff (small)

hidden field

Single-Sided Buffing Pads

$0.00